answersLogoWhite
Oil and Oil Filters
Buick Skylark
Ford Expedition Eddie Bauer
Ford Expedition XLT

How do you remove door for oil filter in skylark 1990?


Top Answer
User Avatar
Wiki User
2006-10-23 16:04:25
2006-10-23 16:04:25

you need a 15/16" box wrench or socket, turncounter clock wise, have a pan to catch the oil, it is a messy operation, the filter is inside the cover. to get filter out use a pliers to lossen filter with a wiggle back and forth, there is more oil when the filter comes out, this was not the best enginearing job by GM have plenty of rags handy good luck!

Related Questions

User Avatar

Behind the glove compartment door. Open and empty the glove compartment door then remove the two door stop/bumpers to allow the door to drop down. This will expose the cabin filter access door. Remove the cabin filter access door and the cabin filter will slide out easily.

User Avatar

# If equipped, remove the Instrument Panel (I/P) sound insulator. # Remove the filter access door screw under passenger sie I P # Remove the filter access door from the HVAC module. # Remove the passenger compartment air filter

User Avatar

The 1990 Chevrolet Suburban door panel is held in place with 14 retaining clips and two screws. Remove the screws, that can be found near the door handle. Pry outward on the retaining clips to remove the door panel.

User Avatar

The fuel filter is located underneath the car by the drivers side door.

User Avatar

Remove the glove-box and door so that you can see it better and it will be easier to remove the tabs............ Once the glove-box and door have been removed the cabin air filter is located between the evaporator and the main control box. Remove the tabs, the cover and then remove the cabin air filter..............


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.