To remove the door panel. Just simply take something like a screwdriver and put in between the door and the panel. The panel is held on with little plastic like snaps.. That will get the panel off.. and if you was to brake one.. any part store carries the little plastic things for like a dollar or two for about 20 of them.
I dont know. Ive never done it!
What do I need to do to take the door panel off a 1996 Chevy Silverado? Pickup has power windows and door locks I need to fix inside door handle
Remove the screws in the door panel.
take door panel off
== ==
Using a screw driver, remove the screws and the clips in the panel of the door and remove the panel gently. Remove any wiring connectors between the panel and the door, then remove the panel the rest of the way.
Remove the inside door panel of your 1987 Chevy. Remove the linkage from the door handle. Remove the door handle retaining bolts. The door handle will come off.
what steps are required to remove the inside door panel on a 1997 Chevy Malibu.
i think you should remove the door first then remove the door panel by hitting it with a soft hammer to release it.
Removing a 1991 Chevrolet Silverado door panel is pretty simple. All you will need to do is to remove the screws holding the door panel in place.
pull out the 2 screws in the door handle then go around the edges and pry it off its only held on by clips but once u get the panel uncliped just unhook the wiring
Remove the door panels