How do you remove front axle on polaris ranger?
Jack up and remove tires. Remove axle cotter key and nut. Remove ball joint cotter key and nut. Drop lower control arm and pull axle from spindle. To do this put castellated ball joint nut on backward and flush to protect threads. Strike balljoint nut with deadblow hammer while prying lower control arm loose. Sharply pull axle shaft from differential. 700XP owner, axle repair wizard.
Is it required to break the transmission loose from the engine to drop the oil pan on a 4.7L 2002 Dodge Ram 1500 engine?
remove axle nut in center of wheel before jacking it up then raise and support vehicle on stands and remove front tire then caliper and rotor then rotor mounting bracket remove bottom ball joint from the front spindle and you should be ready to pull the axle out then just reverse these steps to reinstall. hopefully this helps you
front or rear rotor? jack up wheel that needs rotor removed. remove wheel remove brake pads and caliper for back axle, remove axle nut. u will need special socket to remove this nut slide rotor off axle, making sure u dont drop bearings on the ground to remove front rotor on4x4, it is pretty much the same as rear , except you will have to remove locking hub from axle before you can remove axle…
How do you gain enough clearance to remove the oil pan on an 89 Toyota 4x4 pickup 5 speed with an SR22 engine?
Front wheel drive: Jack up the car and put on stands. Block the rear wheels. remove wheel remove caliper and suspend from frame work do not let it hang there. Remove axle nut. Remove nut and bust loose lower ball joint. Move spindle out of the way and pull axle assembly from the transmission. Buy replacement axle and reverse above procedure