Your Lug Nuts should be 19 mm and there should be 5 of them. That large nut in the middle "the center hub" leave it alone. It has nothing to do with front tire other then holding the axles and rotor together.
1 1/4 inch
Center front of the engine.Center front of the engine.
- remove wheel - remove clips holding pads on - loosen bleeder valve and compress cylinder - remove recessed bolt on back of caliper (10mm deep socket) - remove caliper - slide pads off
center front of the engine.
1 1/4 inch1 1/4 inch
Front or rear?
Depending on the exact model, you may have a few things to remove in front of it. When front is clear then remove the brake master cylinder then the booster. A lot of awkward wrench work can be made easier if you have a good socket set with universal joints.
Front and center in the dashboard...
Follow the wires to direct front center of throttle body,have to remove top,lg black cover
Front Park/Turn Signal and Sidemarker LightsLocate the access door in the wheel house.Rotate the access door to remove.Twist out the light socket and remove bulb.Replace bulb, reinstall socket and then reinstall access door.
It requires a 1 1/4 inch socket.
Hemi, lower passenger front of the engine. 3.6, top center front of engine. Use a 24 mm socket to remove the plastic cap to access.