Want this question answered?
I need to remove my glove box on my 2009 Nissan Murano. Where are the glove box pins located?
yes it's behind the passenger side's glove box... I own a 2002 Nissan xterra and had to do some searching to find it
Actually in that year and model of Nissan maximas the security code is hidden behind the glove box on a gold box. to get to the code you will have to remove the glove box.
Remove the glove box, it fits behind there.
This is detailed in the Maintenence and Do-it-yourself section of your owners manual. Owners manuals can also be viewed online from Nissan. The cabin air filter is behind the glove box. The glove box must be opened while pressing both sides in until it hangs down completely. Remove the filter cover bolt and then the filters. Replace the filters(two come with each set). Replace cover and glove box. Go to this site to purchase the filters and/or to read about how to replace them. http://www.xterraparts.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=Xterra&Product_Code=B7200-00001
how to remove my glove box
how to remove glove box in 1993 camry
no
It is located behind the glove box. The glove box must be removed and you will see an access panel in the duct work. Remove this panel and you will see the filter.
The resistor is located behind the glove box. 1) Remove the 2 glove box latck sctews. 2) Remove the 4 screws holding the glove box, 2 on the tow and 2 on the bottom. 3)With the glove box removed, you will see the resistor located below the blower motor. Un plug, remove the 2 screws, and replace with new.
Behind glove box. To change the cabin air filter you do not need any tools. 1. Pull out glove box pins. 2. Remove the glove box assembly. 3. Remove the filter cover. 4. Take out the in-cabin microfilter from blower unit. 5. Replace with the new one and reinstal on blower unit. 6. Reinstal the glove box.
Assuming it's the same as a 94 C1500, Open the glove-box, remove the screws across the top and bottom, remove the cables that support the glove-box door, remove the glove box door, remove the glove box compartment. I have a 95 K1500, you just have to squeeze the top of the glove box, clear the mount and then remove the plastic strap on the left side, and then open the glove box fully it just fall down, no need to unscrew anything.