you dont! it has to be in the off position
I have to jump start my Pontiac Bonneville 1988 everyday I drive it why is that.
Begin by removing the retaining ring at the top of your 1990 Pontiac Bonneville ignition switch. The ignition switch will slide out. Remove the wiring harness from the end of the ignition switch. Reverse the process to install your new ignition switch.
how do you remove the turn signal assembly on a 1989 Pontiac Bonneville
what tools do i need to remove the wheel cylinder on a 1993 pontiac bonneville
How to remove left inner door panel of a Pontiac Bonneville 1996
Before you remove the evaporator core from a 1998 Pontiac Bonneville you need to have the air pressure discharged. You will then need to remove the AC unit. You will need to remove some screws before you can remove the evaporator.
is it a ford? push the key in further and then turn it
The PCV valve on a 2002 Pontiac Bonneville is located on the back of the in take manifold, however to get to the PCV valve you will need to remove the valve cover.
17
Remove steering wheel Remove Steering lock plate Place ignition in on position Depress lock pin now exposed. If this is not possible, drill out lock pin.
Begin by removing the decorative cover from your 2001 Pontiac Bonneville radio. Remove the radio retaining screws. Slide the radio out and remove the wiring harness and the antenna cable.
I own a 1996 bonneville. The tensioner bolt is a reverse threaded bolt, (tighten to loosen). Hope this helps. DCC