Removing Front & Rear Rotors Well Guys...
I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT.
I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off...
The way I removed the Front & Rear Rotors was ...
1. I put lots of PB Blaster in the back and the front of the rotors to be removed.
2. I put plenty of tension with the 3 Jaw Puller...
3. I hit the back of the rotor with the sledge hammer...
And it came right off...
Hope this helps someone out there...
Remove wheels Remove 2 caliper mounting bolts Slide caliper off rotors Rotors should slide off hub
Remove the rear wheels, then the calipers and simply pull the rotors off. If the parking brakd is on the caliper you need a special tool ot retract the caliper.
pull off the front wheels. remove the calipers. remove the two screws that hold on the rotors. replace the rotors and reverse the procedure.
To adjust your parking brake on a Ford Expedition. You will need to remove the rear rotors. Removing Front & Rear Rotors Well Guys... I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT. I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off... The way I removed the Front & Rear Rotors was ... 1. I put lots of PB Blaster in the back and the front of the rotors to be removed. 2. I put plenty of tension with the 3 Jaw Puller... 3. I hit the back of the rotor with the sledge hammer... And it came right off... After adjusting parking brake install rear rotor /tire and your done. Hope this helps...
No there not press on. They are Flowting Rotors. You will need a 3 jaw gear puller to be able to remove them easy.
Remove the tire and wheel from your 1997 Mitsubishi Montero. Remove the brake shoe assembly. Tap on the rotors to loosen them. The rotors will slide off. Reverse the process to install your new rotors.
how to remove front rotors on 2003 Nissan fronter 4 wheel drive pick up
Hi, First you remove the wheels, the calipers and rotors. Then you are gonna see the shoes behind the hub (the part where the wheel is bolt on). It is quite difficult to replace if you don't have much mechanic skills and tools.
how do you change the rotor in 2000nisan xterra
The way I did mines was the old fashion way. I took the rear rotors off and adjusted them. I don't remember if it can be done with the rotor on or not.
Same way as the front. First remove the calipers, then remove the two cross-point screws that hold the caliper in place . finally, remove the rotors and replace.
Remove the brake calipers first. Then there are two small philipsa screws in the rotors remove them and the rotors come off then. Just reverse the procedure to replace. Rotor costs aprox $54.00 wholesale each. if you are just changing the rotors you can remove the caliper and mouning bracket as one