First, Disconnect the negative battery terminal from the battery. Then remove the A/C belt. Next remove the serpentine belt. Then remove the idler pulley using a 15mm closed end wrench. Next, remove the bolt securing the tension-er pulley and remove the pulley from the spring base.
Next, remove the alternator. Once the alternator is removed you have access to get to the 15mm nut securing the tension-er pulley assembly. Remove the nut and then the spring base. Go in reverse for the assembly.
You cannot adjust the belt tension on a 2000 dodge grand caravan. This vehicle is equipped with an automatic tensioner. If tensioner is frozen or will not hold the belt tight, it must be replaced.
You have to remove the transmission to replace the torque converter.You have to remove the transmission to replace the torque converter.
No. The transmission is removable.
for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan? for a 1994 Grand Caravan (probably like the 1995) see: How do you replace the headlight assembly located on a 1994 Dodge Caravan?
The belt tensioner is rotated clock wise with a 15 mm wrench or belt tool.
On replacing the tensioner you first must raise the van up to get under it, you can reach it better you wil need a long extension & swivel and 15mm socket.
You unbolt the old one (one bolt) then fit new. Now refit the belt.
how to replace power window motor for 2003 dodge grand caravan? how to remove side panel dodge caravan 2003?
No, you only need to remove the tire to check it's pressure.
Pull on the belt and you can see how the tensioner moves. Put a wrench on the bolt.
You will need to remove the retaining ring at the top of your 1995 Dodge Grand Caravan ignition switch. Slide the ignition switch out and remove the wiring harness. Reverse the process to install the new ignition switch.
A 2000 Grand Caravan does not have a cabin filter.