Want this question answered?
how do you remove alternator on v6 holden vectra
2000 F150 v6 4.2L has 205HP
i would say 2000 v6 mustang depending on what year you got same with the 09 f150
Alternator woult come out of body
unplug electrical connectors. remove drive belt. remove alternator mounting bolts and remove alternator. installation is reverse.
disconnect battery. remove electrical connections from alternator. remove serpentine belt. remove alternator mounting bolts and remove alternator. Installation is reverse of removal.
remove negative battery cable. remove electrical connectors from alternator. remove belt. remove bolts holding alternator, I believe there are two, then remove the alternator. Installation is reverse. very easy job.
It should be the same as for a 2002 Mercury Cougar which is answered in WikiAnswer under the Question; " How to remove alternator from a 2002 Mercury Cougar 2.5L V6." The 2000 Cougar may be different by having an upper alternator BOLT. If it does, and you can't lift the bolt out (after fully loosening the bolt), lower the alternator and you can, then, lift the bolt out. When you begin to install the alternator (attach the power wire, and the wire connector) place the BOLT in the upper hole in the alternator, and THEN, raise the alternator to install.
The torque strut mount must come out along with the mount to remove the alternator
the thermostat is behind the alternator! gotta remove the alternator and most of the plugs around it to get to the bolts on the thermostat housing
Remove Air Cleaner Box Assembly to gain access to alternator, Loosen bolts on alternator mounting bracket to relax alternator, Push alternator towards block to relax belt and away from block to tighten. Now tighten alternator bolts while keeping tension on alternator.
V6 MODELS # Disconnect the negative battery cable # Remove the drivebelt # Disconnect the electrical connectors from the alternator # Remove the mounting bolts and remove the alternator V8 Models # Disconnect the negative battery cable # Remove the engine cover # Position the cruise control cable and throttle bypass hose asside # Remove the drivebelt # Disconnect the electrical connectors from the alternator # Remove the 2 upper stud bolts and the 2 upper alternator mounting bolts # Remove the 2 lower alternator mounting bolts and remove the alternator