Auto Parts and Repairs
Oldsmobile Achieva
VW Jetta
Late Model 1979-New Ford Mustangs

How do you remove the automatic console shift knob on a 1992 Oldsmobile Achieva?

515253

Top Answer
User Avatar
Wiki User
Answered
2015-07-15 19:44:07
2015-07-15 19:44:07

there should be a u shaped clip in the front of the knob, almost like a staple. pry that out with a screwdriver and the knob should pull off.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Related Questions


i need instructions on changing a heater core on a 1997 Oldsmobile achieva

To remove the console shift knob on the AT 1993 Olds Achieva, first pry the cover from the top of the shift knob. Then, access the single screw inside the cover of the shift knob and turn it counter-clockwise to release the knob.

put your key in the ignition, turn to on position, press down break pedel and shift into gear you want to be in If the car won't start and you have to move it there is a small removable cover on the passenger side of the shifter console. if you remove the cover, you can manually push in a lever that will unlock the shifter so that you can take it out of park.

Remove the four bolts on the cover plate and lift straight up exposing the wiresets.

if you dont have a slot on console you have to pop remove the center console plate on top there a release under there

I am about to attempt this same procedure on my 97 also, according to the Haynes Manual, theres a screw on the parking brake handle that you have to remove, and one on the shifter also, after that its just a bunch of plastic fastners. once you remove the console and the floor panels, its supposedly just held in by 2 clips.

I am about to attempt this same procedure on my 97 also, according to the Haynes Manual, theres a screw on the parking brake handle that you have to remove, and one on the shifter also, after that its just a bunch of plastic fastners. once you remove the console and the floor panels, its supposedly just held in by 2 clips.

2.3L quad 4 is located under the exhaust manifold passenger side. To replace you have to remove the exhaust manifold.

Mold & Mildew buildup in the A/C condenser. Do a Google search for ways to kill it and remove the odor.

Remove the 1998 Oldsmobile power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.

Changing brakes is a simple task. Lift the car, remove the wheel, remove the brake shoe, replace the pad, replace the shoe, replace the wheel and lower the car.

Open the console lid. Remove the console compartment inserts. Remove the transmission select switch (if equipped). Remove the nuts that retain the rear of the console. Remove the cup holder insert. Remove the screws that retain the front of the console to the vehicle. Remove the console from the vehicle

lift up the center plate on the console were your gear select is after you remove your shift lever and all the lever pieces and there you can remove the top of the console and the bottom has 4 bolts 10mm remove those and you shift your car all the way down to first or low gear and lift it up un plug the harness and there you go

I am about to attempt this same procedure on my 97 also, according to the Haynes Manual, theres a screw on the parking brake handle that you have to remove, and one on the shifter also, after that its just a bunch of plastic fastners. once you remove the console and the floor panels, its supposedly just held in by 2 clips. So I would say no, no special tools

AutoZone.com has some info that might help: http://www.autozone.com/az/cds/en_us/0900823d/80/0e/5e/c8/0900823d800e5ec8/repairInfoPages.htm

in the exhaust system Very close to the manifold, you should see a wire come out of a large nut, to remove and replace you should have a socket made for this application

Remove the shifting knob. Remove the center console cover retaining screws. Remove the retaining nuts from the floor. The center console will come out.

You should start from the center by the radio. then there will be screws in you arm console. remove the shift handle this is also held on by a screw probably on the bottom. lift from the rear of the console so you can tell if you still have screws in other places.

You will need to remove the center console cover. The lightbulb will be attached to the inside of the center console. Push the lightbulb in and turn at the same time to remove it. Reverse the process to install the new lightbulb.

The radio unit on a Hyundai Elantra is held in place by a mounting bracket found behind the center console. First remove the center console then remove the screws on the mounting bracket. The radio will be able to slide forward. Once pulled out remove the wire harness that plugs into the radio.

how do you remove the center console on a 2005 toyota camry


Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.