0
How do you remove the back bolts on the crank shaft in a 2001 malibu 3100 not the pulley bolt the 8 on the opposite side?
Wiki User
∙ 11y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you repair a crankshaft pulley for a 98 Saturn SC2 DOHC?
u need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removalAnsweru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal Answeru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal
How do you move the power steering pump on a 2002 Chevy Malibu to get to the camshaft position sensor?
take the belt off, remove the three bolts by turning the pulley (there are three holes in it to see the bolts), then you can get to the camshaft sensor.
How do i take my ac out when i cant get to bolts out when the pulley is in the way of the bolts?
use a thin wrench or if possible just remove the pulley
How do you put on a water pump pulley for the serpentine belt on a 1995 Chevy Lumina minivan?
there should be 3 or 4 bolts that hold pulley on, just remove these bolts a pulley should come off. but remove belt first ! if pulley keeps turning while removing bolts. you can hold it stationary with a scredriver or similar.
How to remove belt pulley?
depending on the pulley, you must remove the belt and the bolts holding the pulley in place. some cars have pulleys that are harder to remove and have what is called a torx nut. this requires a special socket. it is easy to remove a pulley if you start with the belt on so it doesnt move
How do you change your power steering pump on a 1999 mazda b2500?
You need a special tool, pulley puller and installer to remove the pulley first then you remove both hose and bolts to remove the pump, then install new pump and hoses, bolts and finally install the pulley with the special tool, never try to hammer in the pulley, if you do new pump will brake
How do you replace the water pump belt pulley located on a 1991 Buick Park Avenue?
You have to remove the engine mount next to it, then remove the 4 bolts in the pulley
How do you remove the power steering pump on a 1994 Chevy Corsica?
Loosen, then remove the belt. Shine a light through one of the holes in the PS pulley and turn it slowly. You will see three bolts through the holes. Use a 13mm socket and a swivel to unscrew and remove these bolts. Lift the pump out of position and remove the hoses. Use a Power Steering Pulley Puller to remove the pulley. This puller grips the pulley by its center hub. Any other type of puller will destroy the pulley and then you will need a new pulley.
How do you pull a damper pulley from a Chevy 350?
If you are just removing the pulley, Then just remove the bolts that hold it on being sure to remove the bolt that is in the middle of the pulley too. Then take a hammer and knock it off.
How do you change water pump 2000 ford ranger 3L?
take out the radiator and fan shroud. remove all pulley brackets. take the fan off of the water pump pulley. the water pump is located at the bottom front of the engine. remove all the bolts... and go back with it in opposite sequence
How do you replace the oil pump on 1999 Chevy Malibu?
Drain the oil from your 1999 Chevy Malibu oil pan. Remove the oil pan retaining bolts. Remove the oil pump retaining bolts. Reverse the process to install your new oil pump.
How do you replace murry mower belt.rear engine?
Remove four bolts that hold transaxle remove belt pulley and belt guard. remove shift linkage remove spring tensioner. then remove whole transaxle. Remove four bolts that hold transaxle remove belt pulley and belt guard. remove shift linkage remove spring tensioner. then remove whole transaxle.
