Want this question answered?
undo two or three screws just inside both front wheel arches then where the bonnet meets bumper there are little black plastic gromets , take them out, then pull bumper away from front wings they should pop out of plastic slides then go to front of car and pull complete bumper fowards and off.
Its the transmition bottle behind the front bumper nearside just below the headlight. Stupid place to put it as you have to take the bumper off to get to it..
yes
Will a tow bar of a vectra b fit a vectra c
vectra b is the earlier engine
Probably not has they never work. On vectra b theres a nut under the handbrake gattor, not sure if its same on vectra c
bit of a nightmare to get to, the reservoir is on top of the power steering pump which is located behind the bumper on the o/s/f corner
no you have to remove all of it remember to mark the motor shaft and linkage positions
Remove the cover from your third brake light. Take hold of the lightbulb, push in and turn at the same time. The lightbulb will come out.
Chevrolet is the parent company of the Vectra C which was manufactured in 2002 through 2009. There were three basic models a four door sedan, a five door hatch back, and a five door station wagon.
they are 2 totally different mdels. Vectra B is from 1995 till 2002, and was upgraded in 1999. Vectra C/Signum is the latest model from 2002 till 2008, and then you of course the newest Vectra D introduced early tis year.
easy remove 4 screws securing top of grill. remove 2 screws holding inner wheelarch to bumper. bumper cannow be unclipped. remove 3 screws holding headlamp jiggle lamp free enough to gain access to bulbs 2012 corsa