answersLogoWhite

0


Best Answer

This can be difficult.

Bottom first.

Bottom is held by one of the main wires engaging a slotted bracket on the floor, one on each side. You will need room, and muscle. May have to remove front seats to get enough room. You might be able to see the wire/ slot if you can get your head and some light down there, so you know that you are up against.

Do 1 side at a time. Push down at the front, then rearward. Rearward push may need to be very vigorous, like using your legs and/or all your strength, applied to the big wires across the front at the bottom. If it moves aft about 1-2" then it should move up and out of the slot, then you can do the other side.

Then, the bolts or bendable tabs that hold the bottom of the seat back in place should be obvious. Once those are undone, lift the seat back up about 2" off its slotted hangers at the top, and out she goes.

If you can look at a parts/ junkyard car or find photos on the interwebs first, it'll help visualize what you are doing....

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove the back seat out of 1970 cutlass?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How to remove the upper back seat from a 1994 Oldsmobile cutlass supreme?

First you remove the lower back seat, and the bolts that secure the upper will be exposed. Remove them and lift out upper back seat.


How do you take the back seat out of a 1984 cutlass supreme?

easy, from the front push the bottom seat in or back then up to unhooked them from the floor, 2 locations (underneath from were one sits) then remove torx bolts holding seat belt buckels & back seat, finally lift up back seat and pull out..


How do you remove the back seat in a 1991 olds cutlass supreme?

get in your back seat. feel along the bottom edge of your seat. you will feel two bolts. remove these and the seat will come right out. just did this to my 91 cutty to see if i could get to the fuel pump from there. 6 696 6969 12 12 dont listen to him...he cant spell


How do you remove the seat on a Kawasaki vulcan 700?

there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove


When was The Back Seat of My Car created?

The Back Seat of My Car was created in 1970.


How do you remove the back seat of a Scion xb?

how to remove 2004 scion back seat


How do you remove power drivers seat in a 97 Olds Cutlass Supreme?

Use a 10mm socket.


How to remove backseat of a skylark?

To remove the back seat of a Skylark, reach into the area between the back and the seat and pull up on the seat. The back part of the seat is bolted in and will require a socket wrench to remove.


How do i remove the rear seat from a 1970 impala?

Push in on the bottom of the seat front and then lift.


How do you remove the backseat of a 1986 cutlass?

You need to climb in the back on the floor and push the bottom towards the rear and pull up at the same time. Then there are 2 big torx bolts that hold the rear seat belts in. Unscrew them then push up the back part of the seat.


How do you remove the back seat from a 1999 Dodge Intrepid?

well the first thing is to remove the lower seat. It has two clips near the front of it . Remove the lower seat now. Next remove the side panel right above the back seat. Now you have to remove the bolts for the seat belts, it holds the back part of the seat in. move the back part of the seat up towards the back window. You should hear the seat come loose. Now when you put the seat back in don't forget to pull the seat belts back though.


How do you remove the back seat of a 1998 Toyota Corolla?

To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.