Push in, on either side of the hump, about the middle of the bottom edge of the rear seat cushion. This will disengage the wire from the floor clamp. Lift up the cushion and remove from car. This maybe a little difficult using your knee for pushing may help. Remove the two bolts from the the wire loops at the bottom of the rear seat back rest and lift from the bottom. this will disengage the wire from the back rest clip. Reverse procedure to reinstall. These instructions will work for most GM cars 68-72 A-body (Monte, Chevelle. Olds, Buick, Cadillac) plus other applications.
1971 Chevrolet Monte Carlo
Chevrolet produced approximately 1900 or so of the 1971 SS454 Monte Carlo
The Old Car Manual Project provides the owner's manual for the 1971 Chevrolet Monte Carlo. In addition websites and forums dedicated to the Monte Carlo in general have specific information regarding the 4 engine types associated with the 1971 model.
The fuel economy of a vehicle is something that should be know by the driver. The 1971 Monte Carlo gets somewhere between 16 to 24 miles per gallon.
.035
The maximum speed of a 1971Chevrolet Monte Carlo automatic 8cyl 365HP is 127mph or 204.38kph.
It takes 5 quarts.
Yes. It should bolt right in.
Its a 1971-72 Chevy Monte Carlo hard top
Could be a lot of reasons but we need more info on your problem to help.
Not sure what you mean by "hot water valve". More info please.
your instrument cluster is either corroded and needs to be cleaned, or the circuitry on it is fried.