Want this question answered?
diagrama de timing belt de mirage technica 1.8
remove all belts,tensioners etc, remove pulley bolt, use HARMONIC BALENCER PULLEY to remove - DO NOT USE NORMAL PULLEY REMOVER - must be pulled from center of pulley not from outer edge
To remove the rear view mirror off a 2000 Mitsubishi Mirage first pop off the plastic cover place on the body of the mirror. Than proceed to unscrew the mounting screws.
Buy thre Haynes repair manual for $19.99!!
yes
Turn car on then let it run and heat up then remove dipstick
To remove and install a door mirror on a 2000 Mitsubishi Mirage, the door panel needs to be removed on the inside of the door. First remove any light lenses in the door, then unfasten the clips holding the door panel on. Then remove the mounting bolt for the mirror. Put in a new mirror, replace the door panel and the light lenses.
to remove the tensioner first you need to remove the bracket that holds it. once you have removed the pulley bracket with the pulley still attached to it, 1 remove the retaining nut, and washers. 2 You will need to use a press to remove the bearing from the post.. 3 If you are replacing the bearings on the pulley you will need to remove the "C" clip retainer, and press the bearing out.
unfortunately you going to have to remove the battery to get to the headlight bulb. But it is pretty easy besides that.
Possibly, remove the back seat and see for yourself.
Wilson the alternator belt. With the tensioner pulley. Remove the wiring harness from the alternator. Remove the four alternator retaining bolts.
how to replace the rear bearings on a 1999 Honda fourtrax ATV