1000 pounds. That is why it is called a half ton pickup.
With the automatic transmission, aprox 4,650 lbs.
No
drop the tailgatethen remove screw holding lights in bed
Remove the fuel tank or remove the bed.
It can vary depending on which engine it is equipped with, whether it is a 4x4, and what other options it is equipped with, but it is probably somewhere in the vicinity of 5,500 lbs.
Drop fuel tank or remove bed 08 Colorado 4x4 automatic crew cab
Remove the 3 screws holding gas filler flange on bed and use 3/4 impact wrench to remove mm bolts in bed ,then disconnect wiring at end of bed (tail gate ) and lift bed as best you can
it is hanging under the bed of truck between the rear tires. the jack and lug nut tool is located under the hood.
As long as the hole match and the bed size are the same I don't see why not.
drop the tailgate on side of bed where tailgate closes are couple of screws. thses hold the light assembly in bed. remove thse ,then remove light assembly light bulb is the able to be removed from back of assembly
Disconnect lights,and fuel fill tube the remove 6 or 8 bolts from below holding bed to frame and lift it off.