If you are referring to a Serpentine belt, then you must pull back the idler tensioner to remove the belt. If you have a half inch breaker bar that works perfect with a 15 mm socket. Put the new belt on and the tensioner will apply proper tension. Check to see if the tensioner is good, and replace if necessary. If you are referring to a standard drive belt, then whatever it is driving, Alternator, P/S Pump, etc. you must loosen the bolts holding that item in place enough to allow you to move it far enough to get the belt off. Install the new belt and adjust tension properly.
Remove the belt, then remove the bolt in the center of the spring tensioner with a 15mm wrench, install new one
Remove the belt from your 1993 Chevy G 20 alternator. Remove the alternator wiring harness. Remove the retaining bolts from the alternator. Reverse the process to install the new alternator.
how do you change the air condition controller in a 2004 chevy silverado
If it is a serpentine belt you replace the tensioner pulley
The clutch fan on a 2004 Chevy Silverado is removed by loosening the alternator bracket and pulling the drive belt. The fan's retaining bolts can then be removed and pulled from the engine.
It does not have a timing belt. It uses a chain.
Remove the water return hose from your 1993 Chevy Lumina water pump. Remove the water pump belt. Remove the water pump retaining bolts. Reverse the process to install the new water pump.
A/C Belt Power steering belt. Alternator belt Air pump belt.
timing chain
It has a timing chain and gears.
Doesn't have a timing belt.
Answer how to find belt diagram 97 Chevydo what i, had to do ,look underhood of another 97 Chevy pickup.