Just got done doing it actually. remove all the visible screws.. two in the front two above the cup holders. 4 Screws total there. Next pull off the black part that has the cup holders. Under that there are 2 screws holding the console to the floor. Remove them. Then go to the sides on the back.. There are two covers they are oval shaped. pop them off and remove the 4 bolts in there. Then pull off the top part. Next pull out the whole console. The only part that's left it the metal support. It will have 4 bolts and 4 screws attaching it to the floor. Then your done. Except for the two ugly holes where there is no carpet. This is where I'm stuck :)
The rear of the console has two bolts on either side. You will need an Allen wrench. Unbolt them and remove the console.
how to remove console 2006 ford 500
.
You have to take off the whole dash board to get to the center console!
Screwdriver
# Remove the center console # Detach the retaining screws from the center trim panel.Disconnect any electrical connectors and remove the trim panel
To remove the center console from a 2004 Ford F-150, start by disconnecting the battery for safety. Then, remove any screws or bolts securing the console, typically located at the rear and underneath. Carefully lift the console upward to detach it from the vehicle, ensuring to disconnect any electrical connectors for power outlets or controls. Finally, gently pull the console away from the vehicle.
How do your remove the dashboard on a 2000 Ford Ranger?
How do you remove the flywheel on a 1999 ford ranger
Use an impact wrench to remove center bolt and pulley should slide off
it is directly under the center console between the 2 front seats. Just remove the console and wala there it is.
On a 1995 Ford Ranger : The ODOMETER is near the center of your speedometer