First of all you need to remove panel around shift knob. Then remove panel around the radio. There is no screws, only simple pins. Use screwdriver from plastic or another suitable tool.
The panel around the radio just pulls off. You can get to the bolts now
Are you asking about the trim panel above the glove box or the trim panel in front of the radio or the trim panel around the instrument cluster? Ask again telling us which panel you wish to remove.
First, pry up the trim plate around the shifter. This will reveal two Phillips head screws at the base of the panel around the radio. Remove those two screws and two more screws that are right under the air vents in the panel. Pry the panel loose. There are 2 screws on each side of the radio holding the bracket that has the radio and storage pocket. Remove those. All that's left then is to remove the 4 torx screws that hold the radio to the bracket.
remove trim around radio, remove radio, remove the airvent extension, computer is mounted on the side of the instrument panel. 1 bolt, and 4 connectors
can youi show me how to pop off the panel to remove the radio in the 2007 dodge ram.
Removing a radio from a Rover 25 is easy and quick. All you have to do is remove the trimming with a flat head screw driver, unscrew the panel, take off the panel, unscrew the radio, then take out the radio.
you must pop out the frame over the radio and a/c unit -there are six internal clips. then you will see the screws that hold the instrumet panel.just be careful you don't break the cover.
The molding around the climate control and the radio pulls out then you carefully pull the console out making sure not to snap the clips if you are tring to replace the radio you only have to take the molding off.
# Remove the center trim panel # Remove the radio mounting screws then pull the radio out of the instrument panel just far enough to access the electrical connectors and the antenna cable on the back of the unit # Disconnect the electrical connectors and the antenna lead from the backside of the radio and remove the radio
# Remove the center trim panel # Remove the radio mounting screws then pull the radio out of the instrument panel just far enough to access the electrical connectors and the antenna cable on the backside of the unit # Disconnect the electrical connectors and antenna lead from the backside of the radio and remove the radio
Remove the ash tray, there are 4 screws that secure the center dash panel (the black plastic thingy). Remove them, pull the panel out from the bottom. 2 bolts hold the radio in - remove them, carefully pull the radio out, then unplug the wires from the back.
to remove the plastic panel over the a/c switches you need to first remove the radio then you need a socket to remove the a/c swiches because they are part of the panel there are 4 bolts one in each corner of the space left after you remove the radio.