How do you remove the door panel of a 1992 Pontiac Grand Am SE 4-cylinder automatic?

Answer 1

http://www.a1electric.com/grandam.htm This should cover it. The tool is about $10. I picked one up at acme auto. It may not be exactly like this but pretty close. I'm still trying to pry off the door panel so im going to get back to it. Later- James

+There are some screws that need to be removed-there are 4 screws on the bottom of the door panel, holding the bottom to the door. -there are 2 screws on the top right, on a triangle looking peice of plastic, which covers the mirror.-there is 1 screw behind the lock, pull the lock on the door to the lock position, and you will see a hex screw.-there is 1 screw under the inside handle.... its on an angle and pretty hard to spot, so look under the handle with a flash light and you should see it....+Then get a flat head screw driver,...-pry off the button panel it is on that controls the window (make it move up or down).-pry off the plastic peice right behind the door knob/lever/ what ever you want to call it, its the way you open the door. and once you do that you will see another screw that hold the door panel a peice of metal-then stick the flat head screw driver to the middle of the right and left side and play with it to pop off the door... BE CAREFUL!!!!!!!!!!! don't brake any of the rods-then finally, pull the door UP, it will be a little hard, and you may even need to use the flat head screw drive to pry it up as well....

good luck! -Djpac