answersLogoWhite
Ask
Lincoln Continental
Lincoln Navigator
Door Panels and Handles
Ford Expedition XLT

How do you remove the drivers door panel on a 1998 Lincoln Continental?

626364
Answer

Top Answer
User Avatar
Wiki User
2015-07-15 21:00:20
2015-07-15 21:00:20

remove plastic covers on the ends of the handle...under those there are 2 bolts...remove them...i think they are 10mm...then remove the cover behind the door latch(used to open door)...inside, beside the latch...there is another 10mm bolt. remove it. pry out the window control switch from the front. pull it out. unplug the switch from the wiring harness. grab the handle of the door, then pull upward.

1
0

Related Questions

User Avatar

I was looking at the 1999 Lincoln Continental owner manual and it shows : In the fuse panel under the drivers side of the dash : ( # 16 is a 30 amp fuse for the moonroof switch )

User Avatar

On a 1999 Lincoln Continental : The fuel pump inertia switch ( shut off switch ) is located to the left of the drivers seat , behind an access panel on the " B " pillar

User Avatar

On a 2000 Lincoln Continental : The fuel pump shut off switch ( inertia switch ) is To the left of the drivers seat , behind an access panel on the B pillar ( latch pillar )

User Avatar

On a 2000 Lincoln Continental : The fuel pump shut off switch ( inertia switch ) is behind an access panel , on the " B " pillar , to the left of the drivers seat

User Avatar

On a 1999 Lincoln Continental : The fuel pump shut off switch ( inertia switch ) is located to the left of the drivers seat , behind an access panel on the " B " pillar


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.