1 1/2" wrench needed...you'll see where it goes..turn left...hold on to belt so pump don't turn...(disconnect batery, neg. post)
remove the drive shaft
Pull the radiator shroud, remove the serpentine belt, remove the fan from the water pump shaft, then remove the water pump.
The drive shaft will have to dropped on the yolk end, by taking out the u joint. The bolt can then be removed, it could take some pressure and possibly a pneumatic wrench to break free.
you get a gun and you shot it till its removed
Click the links.
install 3.8 Chevy impala crank sensor passenger side , remove wheel and use pully to pull out crank shaft
By applying heat to the shaft at the end of the stick where the wood is to be removed.
Yes it can.
Once the water pump is removed, the shaft will slide out, the 15hp driveshaft is free floating,
Not an answerable question. Missing need option and specific identification of what steering shaft. There are at least three.
If your speaking of the actual driveshaft from the transfer case to the front differential, there are four torx head bolts to remove on each end of the shaft, if you mean how do you fix the shaft when the truck vibrates insanely, you either purcahase a completely new shaft or take your old one to a driveshaft shop and they can make you a new one with replaceable u-joints. hope this helps
Remove the bolts that hold the drive shaft on to the universal joint on each end.