Want this question answered?
When you remove the caliper, the pads can be pressed out by hand.
Tap on your 1998 Mazda brake rotors with a hammer or mallet until they become loose. The brake rotors will simply slide off.
Remove the high mount brake light retaining screws from your Mazda Protg. Remove the high mount brake light wiring harness. Reverse the process to install your new high-mount brake light.
To add brake fluid in a 1990 Mazda Protege, you need to locate the brake fluid reservoir and check the levels. The reservoir is located on the master cylinder for the brakes.
Above the brake pedal,its black plastic.
HOW DO I TIGHTEN EMERGENCY BRAKE CABLE ON A 2002 MAZDA PROTEGE 5?
about 5mm then after that they will get hot and squeak
Next to the master brake cly.
Lift the car with a car jack, remove the tire and set it aside, remove the brake shoe/caliper, and remove the old brake pad. Put in the new brake pad, replace the brake shoe/caliper, put the tire back on the car and lower the car to the ground.
this is a guess but most Proteges use DOT3
behind the engine on the firewall
how do remove the brake drum on a 1991 mazda 323