On the underside of the track on each end there is a torx screw. Slide the seat forward and you can get to two of the torx screws. Slide it back and you can get to the other two. The seat will lift off without having to remove the brackets.
you can't
No, the spacing is different.
Each seat has 4 nuts attaching to the floor. Just remove those nuts. Also do not forget about wires underneath of the seats especially if you have power seats.
To remove the seats from a 1995 Corvette, you will need to remove the front and rear nuts from the seat frame studs. You will?æalso need to remove the lug wrench that is attached to the seat frame studs.
diagram from front vacuum motor to transfer case of 1993 Jeep Wrangler
The front seats should be compatible. The rear seats were designed differently between 1992 and 1995, so no on that.
Go to Car-Part.com and you can find many many seats for this car
remove the four bolts at the front and the rear
remove front door panel 1995 Nissan maxima
Front about 3.5 pints rear about 5 pints.
I think you have to remove the driver's side front tire and the battery is up in front of that. Believe it or not!
1994-19971994-1997