its really easy. unscrew all the screws on the door panel. Next there is a extra bolt on the side facing towards the back of the car, make sure that is removed as well. After that take your handle to open the door and slide it towards the front of the car then pull, there will be two metal things on your handle, one is to lock/unlock the door and the next is to open it(they are easy to take off but hard to put back on) after that is removed take the panel and slide it up to the sky then pull out. And viola.
Good luck.
Remove the door panel
Yes, it's inside the fuse/relay panel.
Usually located behind the driver's door panel. Remove inside door panel for access
remove black plastic panel on inside behind mirror. remove switch panel by pushing forward then lifting up. disconnect wiring. remove panel covering door handle[one screw]. remove screw behind this panel. remove screw at top of arm rest from underneath rest. remove screw from underneath back corner of armrest.now lift straight up on door panel.
you need to remove the inside door panel to get access to the inside, remove the clips holding the door handle assembly and the whole thing comes off
how to remove a sunroof in a 1998 Saturn 4 door sedan
Remove the inside door panel. You will be able to see the entire window mechanism. Remove the obstruction that is keeping the window from closing.
It's inside the car on the passenger side. You'll need to remove a hush panel to gain access to the motor.
Remove the screw inside the pull handle that opens the door from the inside. Remove two bolts from underneath handle (the one that you pull when closing the door. remove the speaker. Start with bottom corner and pry the door panel off. You will inside to remove (pull up) "the lip" or molding at the top, beside the glass, to be bale to pull the whole panel up. Also, the mirror triangular cover
Saturn uses an electric fuel pump that is mounted INSIDE the fuel tank.
who cares
Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). (Triangle looking shape near the side view mirror) 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. The installation is the reverse of the removal.