Want this question answered?
Remove the power locks and windows fuse you will loose power for your windows also
Windows, doors, wheel locks, engine, gas, mirror and more.
When removing the door panel, you need to remove all of the screws first. Then pull the door panel off. There should be screws around the edges or the door panel, and 1-2 screw on the door handle(on the inside). Then pop the door panel off, if the blazer has electric windows and locks you have to disconect them first, if it doesnt have power locks and windows, you have to take the window crank off,there should be a screw in the center of that. Unscrew the door lock and pull up. If it doesnt have them locks then you have to disconect it from inside the door panel
Device Manager
There are 2 screws in the bottom of the door and 2 more under the door handle in the inside of the car just pop it off at the seems and screws will be inside pop panel off and unplug the power locks
the trim piece that covers the inside of the door pillar must be removed. once removed you will find a electrical connector that will release the wires for the whole door, then unbolt hinges and remove
What do I need to do to take the door panel off a 1996 Chevy Silverado? Pickup has power windows and door locks I need to fix inside door handle
1st - Remove screw from inside the armrest (and remove entire molded plastic console. Cables for mirror and windows can be unclipped)2nd - Remove plastic cap from inside door handle and remove screw (Again, remove molded plastic cable for door locks can be unclipped)3rd - Remove 3 screws on the perimeter of the door4rth - Either pull the plastic panel off or get the tool so as not to damage the door panel
Door Panels Removal & Installation 1. Remove the sail panel (Front Doors Only). (Triangle looking shape near the side view mirror) 2. Remove the door panel by carefully lifting the panel upward to release the retaining clips. 3. Remove the electrical plugs that control the windows, exc. The installation is the reverse of the removal.
To remove the door locks on a 1991 S10, the door panel has to be removed. There are bolts inside that hold the lock mechanism in place.
Key combination [Windows+L] locks Windows XP.
It takes a special tool. Not expensive at the parts sttore.edit by jwko - My gosh, it takes no special tools. Roll the window up and remove inside door panel. Be careful if you have any pwr windows/locks/mirror switches. You should be able to pop those out first and remove wiring harness. When you remove the inside door panel you sould be able to see how to easily remove the door handle assembly.