you have to remove the 2 brackets of the rear panel situated where the rear window close, then take the rear panel up, that's all
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
how do you replace rear wiper motor on a 1997 ford explorer
Remove the trasnsmission and you can then replace the seal.
well you have to take off the front end of the motor and carefully pop out the bolts andthere you go have a great day
The wiper arms have a small clip under them that pushes to the side, then the arms pull off. The motor is under the cowling, remove the cowling to gain access.
How to replace wiper motor on a 1998 montero sport mitsubishi
If you use the motor mounts off of the 1991 explorer also, it will fit and transmission should line up if it is same size motor. If going from a automatic to a standard, you will have to replace the flywheel.
How to remove the window motor from the regulator
under the glove box there is a panel that holds the blower motor...remove the screws...4 i believe....remove the black plastic cover....there are three screws that holds the blower motor in...remove these and then remove the blower motor...unplug the power source and feed wires out of the hole.....reverse to replace the motor
Remove wiper arm then remove inside trim panel being careful not to crack it then remove motor connection then motor
Remove the blower motor retaining nuts. Remove the wiring harness from the back of the blower motor. Remove the fan from the blower motor. Reverse the process to install the new blower motor.
Remove the wiper arm from the wiper motor. Remove the wiring harness. Remove the wiper motor retaining bolts. Reverse the process to install the new wiper motor.