From inside the van after removing dog house. 1/2" socket on long extension
Remove the belt from your 1994 Chevy Astro Van 4.3 liter engine alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
There is a belt tightener on the alternator which must be loosened to take the belt off. After the belt is loose, remove the bottom mounting bolt and the alternator is off. you will also need to remove the wiring.
How do you remove the dashboard fascia on a 1999 Chevy Astro?
Remove Battery Negative Cable & secure away from post. Release tension on Belt Tensioner & remove Serpentine Belt from Alternator Pulley. Remove Battery Cable & Electrical Plug from Alternator. If applicable, remove Power Steering Line Clip from Alternator. Remove Alternator Mounting Bolts. Remove Alternator. Installation is reverse.....
How do you remove the steering wheel on a 1998 Chevy astro van
First disconnect the battery, Remove the wire attacked to the alternator bolt,(RED WIRE) remove the wire harness under the post, remove the belt 15mm wrench/socket will be needed for the belt tension pully, remove the top mounting bolt into the alternator thru the mount bracket, remove the lower mounting bolt into the alternator thru the mount brcket, remove the mounting bolt on the back of the alternator. its a simple replacement, to reinstall the alternator put all the mounting bolts back in the belt back on the wire plug back in the (RED WIRE)back on the wire post attack the battery. is also listed in the Haynes manual available at MOST auto part shops.
1st remove negative battery cable from battery. then remove electrical connectors from alternator with ratchet, rotate tentioner pully to remove belt. (near top/center of belt) remove support bracket and mounting bolts and it's off.
Remove the belt from your 2002 Chevy Cavalier alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
Remove the belt from your 1993 Chevy G 20 alternator. Remove the alternator wiring harness. Remove the retaining bolts from the alternator. Reverse the process to install the new alternator.
Remove the belt from your 1999 Chevy Malibu alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
the alternator will be located close to the top of the motor, you will need to loosen the tensioner pulley and remove the serpentine belt, disconnect the elictrical connections at the alternator and remove the alternator mounting bolts. then just lift the alternator out... as far as tools you will need a basic set of sockets and a screwdriver.
The voltage regulator is built into the alternator.