See the link for instruction and photos. >>>>>>>>>>>>>>>>>>>>>>>>>>>
Remove the inside door panel of your 1993 Chevrolet Lumina. Remove the passenger mirror wiring harness. Remove the passenger mirror retaining bolts. Reverse the process to install the new passenger mirror.
Infront of the passenger at the firewall
try a sledge hammer
Jack up the pasenger side of the car. Remove the wheel. remove the rear plastic shield. There it is!
Very easy fix, I have a 93 Lumina Z34 and did this myself a couple of weeks ago. I picked up a used mirror at a local junkyard for $25.00 and spent about 45 minutes installing it. My mirror had the small manual adjustment inside the passenger compartment. Remove the screw from the inside of the door panel in the area of the mirror. (No need to remove the entire door panel.) The small adjustment knob inside the passenger compartment has a small Allen bolt located on the underside, loosen it so the cable assembly can be removed from the holder. (Look at this paret closely, it can only be reinstalled a certain way due rto how it is made.) Remove the bolts from inside the passenger compartment that attach the mirror. (I stuffed a rag below the screws in the door panel to catch them in case they fell while removing.) Remove the mirror or whats left of it and instasll your new one.
take inside door panel off or loose enough to get to the 3 nuts that hold the mirror on.
engine diagram for a 1993 saturn
On the driver side mirror adjust turn the adjust knob clockwise and that will allow you to adjust the driver side mirror. Turn the adjust knob back counterclockwise for the driver side mirroradjust
You would need to remove the door panel, and then remove the 3 11MM bolts that hold the mirror onto the door. An instructional video has also bee provided at the link below. Hope this helps, 1ATony
Face in the Mirror was created in 1993.
Financial Mirror was created in 1993.
1993 Saturn sl2