I am replacing my radiator support in my 93 Nissan Sentra SE-R this is the best i have found to do the job. i am using mig welder also to replace the welds.
go to this link --->
http://www.goodwrench.com/gmgoodwrenchjsp/gmspo/Cadillac/Eldorado/1992-1999/02_Radiator_Support_Assembly.pdf
Should be a drain plug either at bottom or rear of radiator or remove lower hose
how do you remove a distributor rotor on a 92 Nissan sentra
nissan sentra 2008 std
go to the dealer to do this
To remove a 1998 Nissan Sentra Transmission, you first need to locate all of the bolts. From there, you will remove the bolts. Undo any wiring or tubing that goes into the transmission. From there, it can be taken out.
For the 1988 1.6 and for most cars, follow the top radiator hose from the radiator to the engine block. Remove the hose from the engine block then remove the flange the hose was connected to (usually 2 bolts but may be 3 bolts on the Nissan). The thermostat is behind the flange.
very carefully :)
How do you remove and install front door panel 1985 Nissan Sunny
can a starter be removed from the top on a 98 Nissan sentra gxe
Open your hood and locate the upper radiator hose coming from the top of your radiator. this hose should go straight to the thermostat housing. You will need to drain the radiator and remove the hose. there should be three ten millimeter bolts hold it on remove the bolts and replace thermostat.
10mm or 3/8
Have to remove the door, then remove pins and bushings