answersLogoWhite

0


Best Answer

1. Pull both side console panels off the center console. (These are by your feet in the front).

2. Remove the screw on either side that has the shifter panel attached.

3. Pull the shifter panel up at the rear and down at the front to pop it off and pull it back a little. It won't remove completely due to the shifter.

4. Remove the two screws that you just exposed below the traction control/hazard/airbag panel and disconnect the wires attached to the panel.

5. Carefully pull the trim up from around the HVAC controls and the radio. You also have to remove the center wood piece.

6. Now you can remove the screws holding the HVAC and the radio in place and pull the radio out.

User Avatar

Wiki User

15y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

12y ago

you will need to unscrew your dash and pull off the front plate of your dash, then you will need to unscrew the stock radio, then you will need to go ahead and pull out the adapter from the back of your radio. Next you will need to attach your adapter harness to your car harness and splice the color coded wires to the harness on your new CD player.After that, you will need to plug your antenna back into your new CD player, Note that some CD players will require an adapter, these can be found at circuit city or at your local car dealerships.-Shocker

This answer is:
User Avatar

User Avatar

Wiki User

9y ago

Begin by removing the decorative radio cover in your 2006 Chevy Malibu. Remove the radio retaining screws. Remove the wiring harness and the antenna cable from the back of the radio.

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove a radio from a 2006 Chevy Malibu?
Write your answer...
Submit
Still have questions?
magnify glass
imp