Pull the wiper arm away from the rear glass. Pivot the blade so that it is perpendicular to the arm and push towards the wiper arm, and voila!
See sources and related links below for wiper blade installation videos and for information on the special rear wiper blade.
Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.
How to replace wiper motor on a 1998 montero sport mitsubishi
try compound
# Remove the windshield wiper arms # Remove the cowl cover # Disconnect the electrical connector from the wiper motor # Detach the wiper motor/linkage assembly from the cowl # Remove the wiper motor retaining bolts and remove the motor
* Remove the windshield wiper arms * Remove the cowl cover * Disconnect the electrical connectorr from the wiper motor * Detach the wiper motor/linkage assembly from the cowl * Remove the wiper motor retaining bolts and remove the motor
# Remove the wiper arms # Remove the windshield wiper cowl cover # Disconnect the electrical connector from the wiper motor and remove the motor # Remove the wiper motor retaining bolts # Pry the linkage arm off the wiper motor pin with large screwdriver
You have to remove the linkage from the wiper motor.
http://www.ehow.com/video_4936070_install-windshield-wiper-motor.html?pid=1&cp=1 (this is a complete video on how to remove and replace a wiper motor...very informative.)
You will have to remove the wiper arms, then remove the cowl, and then the wiper motor.
Remove plastic cap. Remove nut. Pry up wiper arm.....
They are located under the air inlet grill directly in front of the windshield. You have to remove the wiper arms and antenna to remove the grill.
It is located under the windshield cowl (the plastic cover with the holes in it, directly under the windshield). To expose it - remove the wiper arms, and the retaining nuts on the wiper shafts, then remove the screws holding down the cover.