there are six bolts on the bottom of the rear fender 4 in back and 2 in the front. i found it just as easy to take the whole rear fender off seeing as that only held in by a couple of bolts.
How do you remove seat off Kawasaki nomad
1993 kawasaki voyager motorcycle how do you remove the driver seat?
there are two bolts in the back of the seat. remove them and then slide the seat back about an inch and remove
with your hands.
Remove drivers seat by lifting tab on front of seat.
pop off seat for kawasaski mojave 250cc1989-2005
remove the passenger pad first, when removed it uncovers screws on the rear of the drivers seat. Remove these and it comes off.
It is underneath the seat, to remove the seat there is a release under the back above the taillight. Remove the seat, and the battery is right there.
remove seat. remove tool case. Remove terminals from battery, lift out.
Push down on the seat while you are pulling the lever, then pull up on the seat. Edit: My 96 Kawasaki Vulcan has no leaver. You simply remove the thumb screw at the very back of the seat under the rack, then pull the seat backward till it pops free from the bracket.
When you open the toolbox on back of the seat, there are two bolts inside. Remove the and the seat lifts right off.
the seat comes off with the plastic rear fenders as one piece. only after the fenders are taken off can the seat actually be removed