Most shifters are held in with retaining clips that you access through the top, around the shifter shaft.
Remove the shifter knob. Remove the shifting linkage. Remove the shifter retaining bolt. Reverse the process to install the new shifter.
May have to remove shifter to align "forks" in transmission Boot and shifter should unbolt from interior or vehicle
How do i remove a shifter on a mercedes
If it is just the shifter, try to remove the bolts at the top of shifter (UNDER RUBBER BOOT) to realign shift forks and free transmission.
i had the same problem. what i found was the fault or the book when i went to check the oil level from the front of the trans this bolt is NOT A PLUG it holds the back of the revers gear shaft in place i recommend you do not remove you have to open the case to fix the problem
how to remove trans shifter cable ball socket from shifter ball
There is a little box or cap in front of the shifter remove the cover and press down with a screw driver. Then check the fuse box and change out the fuse and you will be able to shift to reverse.
how do you remove the shifter boot in a 2001 hyundai tiburon
how do i remove Chevy aveo 2006 shifter knob
You may have to remove the shifter and realign forks in the top of transmission--problem usually caused by wear
carefully pop out the shifter button then remove the snap ring
you need to get a special tool if you just want to pull the shift lever by itself.