answersLogoWhite
Auto Parts and Repairs
Ford Expedition
Ford Expedition Eddie Bauer
Ford F-150

How do you remove the top half of the passenger door panel on a 2003 Ram 1500 in order to access the bolts for the mirror?

323334

Top Answer
User Avatar
Wiki User
2015-07-15 21:31:01
2015-07-15 21:31:01

Make sure all the clips and screws are out of the panel. Roll the window down, lift upwards on the end of the panel closest to the door lock while pushing the top of the panel in, towards the window. The top of the panel sits in a channel next to the window and you have to dislodge it out of the channel.

Go to this website. It will show how to remove the door panel & the side mirror.

1

Related Questions

User Avatar

Remove the inside door panel of your 1993 Chevrolet Lumina. Remove the passenger mirror wiring harness. Remove the passenger mirror retaining bolts. Reverse the process to install the new passenger mirror.

User Avatar

Chevrolet Lumina. Remove the wiring harness or the mirror linkage. Remove the mirror retaining bolts. Reverse the process to install the new passenger side mirror.

User Avatar

Begin by removing the inside passenger door panel. Remove the wiring harness from your passenger side electric mirror. Remove the mirror retaining bolts. Reverse the process to install your new electric passenger side mirror.

User Avatar

Remove the door panel and the mirror is held on with bolts.

User Avatar

you need to remove the door panel on the inside of the car and at the top of the door by the mirror you will see 2 bolts holding the mirror onto the door remove those bolts and the mirror will come off.

User Avatar

You need to remove the inside door panel, then remove the bolts that secure the mirror. It is very simple procedure.

User Avatar

You need to remove the door panel to access the bolts and electrical for the mirror. To remove the door panel, it is all clips on the outside however there are 2 hidden bolts that you need to remove the cover from the door pull to access.

User Avatar

You need to remove the door panel to access the bolts and electrical for the mirror. To remove the door panel, it is all clips on the outside however there are 2 hidden bolts that you need to remove the cover from the door pull to access

User Avatar

Remove long piece of trim which will then allow you access to the fixing bolts. Remove these bolts and the belt will come out

User Avatar

The mirror cover can be removed by removing the mirror cover retaining bolts. You can access the retaining bolts by removing the inside door panel.

User Avatar

pull door skin to access the electrical connection, disconnect remove black triangle plastic cover on door behind mirror bolts remove 3 nuts from bolts pull mirror off

User Avatar

on the inside of the door, opposite of the mirror there is a plastic cover, remove the cover and the bolts holding the mirror on will be exposed.

User Avatar

You will need to remove the inside door panel of your 1999 GMC Jimmy. Remove the power mirror wiring harness. Remove the power mirror retaining bolts. Reverse the process to install the new power mirror.

User Avatar

Remove the cover on the interior by prying then remove the three bolts with a 10 mm ratchet and pull it out.

User Avatar

I just replaced my side mirror. After the bolts are removed you need to work it side to side. It has a tight seal. You also have to remove door panel to unplug the wire that works the mirror.

User Avatar

You will need to remove the door panel from your 2001 Honda Civic. Remove the site view mirror wiring harness. Remove the side view mirror retaining bolts. Reverse the process to install the new side view mirror.

User Avatar

You first need to remove the triangle shaped trim piece inside the door opposite the mirror. It just pries out with a screwdriver. Then disconnect the electrical connections if a powered mirror. Undo the 3 bolts holding it and then remove the mirror. -RC-

User Avatar

there is a plastic insert on the inside part of the door remove it and there are two bolts holding it on.

User Avatar

open the door remove screw holding molding to base of side view mirror. seperate molding from mirror. remove bolt holding top or side view mirror to A-pillar. remove bolts holding bottom side of mirror to A-pillar. disconnect wiring connector.

User Avatar

Remove the inside door panel. Remove the wiring harness from the mirror. Remove the mirror retaining bolts. Reverse the process to install the new mirror.

User Avatar

to replace the passenger side mirrior you remove passenger door panel then the bolts that hold it on will be right there just take them off and put the new one back on

User Avatar

I actually replace my drivers side mirror. I is a mechanical mirror with the turn signal on it. There is a small triangular door panel piece near the mirror. Remove it and remove the 2 or 3 bolts holding the mirror. Remove inside door panel. Unplug/replug electrical connection. The whole process was quite easy (believe it or not)!

User Avatar

First remove the door panel.Once the door panel is removed you will see three bolts that hold the mirror in place. While holding the mirror remove the three bolts and the mirror will come off of the door.

User Avatar

to replace the right side door mirror on the 1992 Chrysler New Yorker, first remove the interior door panel. Then, remove the access cover at the base of the mirror inside the door. Then, remove the three bolts and the wiring that holds the mirror in place. You can then attach the wiring to the new mirror and housing, and then bolt it into place on the door. Replace the access cover and the door panel.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.