The 2007 Jeep Liberty has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
Not sure what you mean by "windshield wiper cover," however if you're asking how to remove the rubber blade from the plastic frame - be careful. The end caps do come off but its not recommended. I recommend simply replacing the entire wiper blade. See videos on link below.
The 2009 Jeep Grand Cherokee has standard hook-end wiper attachments on the front and a fairly specialized pinch tab rear wiper arm attachment. See sources and related links below to view wiper blade installation videos and for information on the special rear wiper blade.
The wiper blade misses the windshield in the middle of the wipe. Is there an adjustment for that ? I have replaced the wiper to no avail.
The 2002 Jeep Liberty rear wiper blade is unique to Jeep. You'll probably have to get the part at the dealer and may be able to ask for the install procedure.
Lift wiper assembly off of windshield into "up" position. Rotate 90 degrees. Pull wiper blade assembly gently toward the windshield. It slips right off. Note: Put protective barrier like cardboard or a towel over windshield in case blade assembly snaps back toward windshield to avoid cracking the windshield.
To replace a windshield wiper motor for a 1998 F150, first remove the bottom trim on the window. Then remove both wiper blade assemblies and all screws on the metal cowling. Remove the retaining clip from the wiper motor linkage and pull the controls rods off.
Remove the windshield wiper arm from the windshield wiper motor. Remove the wiring harness. Remove the retaining nut. Reverse the process to install the new windshield wiper motor.
are you serious... life blade off windshield, unclip plastic fastener off the center of the wiper arm, remove wiper, replace in reverse order.
Turn the wiper switch to the on position. Turn the key on and as soon as the wipers go straight up then turn them off. That will make it easier to remove the blade. Lift the wiper away from the windshield while pulling down. Be sure to not let the wiper fall against the windshield. Push the new one in place and you are done.
There are several things that you can do to help stop your windshield wipers from squeaking. Clean the wiper blade often to remove dirt and debris. Squirt windshield cleaner fluid on the windows to remove dirt. Ensure that the wiper is screwed in correctly. Replace the blades when it is needed.
Pull the wiper arm away from the rear glass. Pivot the blade so that it is perpendicular to the arm and push towards the wiper arm, and voila! See sources and related links below for wiper blade installation videos and for information on the special rear wiper blade.
The wiper arm and blade go to a pivot shaft.