Buick LeSabre
Windshields and Wipers
DIY Projects

How do you remove the wiper arms from a 96 Buick LeSabre?


Top Answer
User Avatar
Wiki User
2014-10-07 02:15:59
2014-10-07 02:15:59

Raise wiper arm up off the windshield. Pull the little metal tab and rotate the catch out that holds the arm up off the windshield. Then pull on the base of the wiper arm and wiggle it up off the splines.


Related Questions

User Avatar

Wiper arms on a 96 Buick Skylark can be adjusted. This can be done by flipping open the plastic snap cover at the bottom of the wiper arm. Loosen the ratchet and remove the nut. Then adjust the wiper arm. Put back the nut and tighten the ratchet.Ê

User Avatar

Most or all years of Buick LaSabre have hook-end wiper arms. Be sure to get the correct replacement wipers and they usually will have step-by-step, illustrated instructions. Normally there's a little tab where the wiper blade is inserted in the the wiper arm hook. Press the tab and pull the wiper blade out of the hook. See video for Hook-End Arms below.

User Avatar

User Avatar

the arm that controls the wiper arms has fallen off the motor.there is usually a clip that holds it on.Look under the cowl for access

User Avatar

The Buick LeSabre has the most common hook-end wiper arms. See sources and related links below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.

Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.