First get the the replacement slave and have it on hand. Have someone in the truck to push the pedal while you bleed the slave cylinder. Use a line wrench to disconnect the line to it. Probably a 10mm. Then taking off mounting nuts and old slave cylinder. To put the new one on just reverse the steps, mount the new one, hook the hydraulic line back up, fill the master clutch cylinder resivoir with brake fluid and bleed it again. Do it until the fluid comes out yelowish. Top on resivoir, and that is it.
How do you replace a slave cylinder on a 1995 dodge neon clutch
How do you replace the clutch slave cylinder on a 1989 jeep wrangler
There are two normal causes. The clutch is worn out or there is a leak in the hydraulic clutch slave or master cylinder. To check the clutch, press the clutch slave cylinder down. If the clutch slave cylinder bellows compresses down to the slave cylinder, the clutch is worn out. Check the clutch master cylinder fluid level. if this is low, then the clutch cylinder need to be checked. To check for a hydraulic leak in the clutch slave cylinder, remove the cylinder's bellows and check for any fluid. If fluid is present, rebuild or replace the cylinder and bleed the system. To check the clutch master cylinder, check the back the of clutch master cylinder for leaks. If fluid is present, replace or rebuild clutch master cylinder and bleed the system. In my experience, hydraulic leaks occur at the clutch slave cylinder.
Does my 1995 Toyota Paseo have a clutch cable
Bad clutch slave cylinder or failed soft hose from master to slave cylinder.
At least the slave cylinder. The clutch master cylinder can be replaced at any time.
is it main cylinder or clutch slave sylinder? if is main then its behind there clutch pedal and if its a clttch slave ots ill be on gear box or near there. hi
if i replace slave cylinder in 1994 Honda civic ex will this make my clutch disengage and engage correctlyanswerchange master cylinder and slave properly then bleed the system properly.
The transmission has to be removed to gain access to the clutch slave cylinder.
Remove the transmission to excess the inturnal slave cylinder
You will need to remove the transmission to replace the clutch slave.
It sounds like the clutch master cylinder or slave cylinder has gone bad.These are not that expensive to replace.