I have a 1997 Tahoe with a trailer hitch. There are two, u-shapped retaining clips on the "inside" of the bumper. Slide the clips off. Now you can pull the housing through the "outside" of the bumper. Twist the socket out of the housing and replace the bulb. Installation is the reverse.
How do you replace a break light switch on 1995 Chevy Tahoe
A Chevy Tahoe's license plate bulb can be used to light up the license plate. In the dark the license's plate will still be visible.
On my 98 Tahoe under the bumper behind the are where the tag is located you just pull the light assembly out. It has a little pressure clip. replace light and replace assembly the same way.
take it to chevy
You have to pop out the harness that holds it on to your bumper. Youll be left with a wire with the light on the end of it. Take it apart, and there is your light bulb.
Look on the back side of the bumper find the socket turn it, remove the bulb replace it, reverse steps to reinstall it
about 3 dollars
You will have to take the dash apart and replace the bulb.
twist rubber housing a quarter turn pull out replace with new bulb
Remove the screws that hold the covers in place. Replace bulbs!
Probably going to have to replace entire radio. Unless you can find a mom n pop shop that will do it
A diagram to replace the brake light on a 1999 Tahoe can be purchased from your local auto parts store. It is located in the Haynes 1999 Tahoe Repair Manual.