Get a size 32 nut
Raise and support the vehicle.
Remove the wheel nearest the axle to be replaced.
Separate the lover ball joint and outer tie rod end stud from the spindle.
Remove the axle nut from the hub.
Separate the strut from the lower control arm.
Pry the lower condrol downward.
Turn (steer) the spindle right if working on the left side or left if working on the right side and pull it away from the car while pushing the axle inward and out of the hub.
Pull, with force if needed, the axle out of the transaxle.
While pushing the lower control arm downward, maneuver the axle out of the vehicle.
Reverse this procedure to install the replacement drive axle.
Answer may vary depending on what type of Honda you own
How to replace left front door actuator on a 2005 honda accord hybrid
It has 2. One left and one right front axels
First remove front axels, then remove the transmission, undo clutch bell housing. Add on new clutch pressure plate.....new clutch bell housing......put the transmission back in and axels
if it is when you turn a corner, it is probably your outer cv joint, if it is when you are driving in a straight line it is probably your inner cv joint. axels
If it is a 2-wheel drive then it has 2 axels in the rear and the 4-wheel drive has 4 axels. in the rear and 2 in the front.
if it is front wheel drive then you need new drive axels
Too much
Is it the back one or is it the front one...?
It is about $300 to $350 in Flushing NY
Take it to the garage
get yourself a Honda service manual.............About 48.00 but worth it.....Very detailed
Any axles for Foreman from 1993 to 2000 will fit.