1. Remove Headlight wipers, (nut) accssible by lifting the cap at the shaft. 2. remove blind rivets at inner fenders to Bumper 3. Remove bolt (2ea) hidden behind the bumper rubber boots at each headligt. 4. Remove Bolts (2 ea) under plastic covers in the bumper, 5. Pop out the direction lights (see owners manual). 6. Remove the plastic punch in rivets at the top of the grille under the hood. 7. Remove the side position lights in the bumper, (click in fittings) 8. Pull out the bumper, like a drawer, just enough. 9. Remove the headlight, bolted and now easy accessed. Thats all folks
The first step to replacing a broken pane of glass is to measure the size of glass required. Then, either go to a store that sells glass panes or hire a contractor to replace the glass for you.
It may not be illegal, but NT won't pass safety inspection.
Replace the glass bottle
you take out the broken bulb and put in the good one YES BUT HOW DO YOU REPLACE IT???
Sure you can replace it! It will just burn out at an accellerated rate because of dirt, oil, and moisture making it's way into the housing.
Truck headlights can be found at your local auto supply store. Unscrew the cover for the old headlight, remove it and then remove the old headlight. You will need a screwdriver and possibly a wrench for this. Next, replace the broken headlight with the new one, and replace the headlight cover. Lastly, check to make sure the new headlight works.
easier to buy a complete new light mate
it is easier to replace the whole headlight unit (as the glass is sealed to the body), but, if you have just the glass... remove the grill (3 screws), remove the headlight unit (one pop-up, 3 small bolts), place headlight unit on workbench, remove 3 retainer clips, cut sealant around glass, remove glass, apply new sealant to cleaned surface, press glass in place, reverse the above procedure... or just buy the whole thing off ebay ($89)
the glass cover on the headlight is not servicable, they are glued during assembly. you have to replace the entire headlight globe or headlight assembly.
WHAT DOES THIS MEAN...HEART OF GLASS
There are two metal clips behind the each headlight. Pull these upward, and the entire headlight will come out very easily. To replace the bulb, do so without touching the glass parts of the halogen bulb,and replace the headlight. Secure with the two clips. See, it was easy.
If new style you need to remove grill-easy to do- then you see that the light globe is easy to replace.