How do you replace a burned out third brake light on a '96 Grand Am SE?
from the trunk look up towards where the lamp is there you will see a two/three wire connection/socket at the lamp... turn the connection/socket about 1/4 to 1/2 turn to the left and pull down slightly you'll find a burnt out bulb...... replace and re-install connector/socket in the reverse of removal..... P.S. Dont get locked in the trunk..... lol
if your lamp is on the top of your rear window then either carefully snap off the cover from inside the vehicle that covers the lamp or remove 2-3 screws from the cover (if applicable) and there you will find the bulb.....
Why would the brake lights license plate lights nor the rear windshield brake light work on your Ford Mercury Grand Marguis?
THE BRAKE LIGHT SWITCH IS NOT PUTTING OUT BATTERY WHENEVER THE BRAKE PEDAL IS PUSHED DOWN. CHECK TO SEE IF BRAKE LIGHTS COME ON WHEN BRAKE PEDAL IS PUSHED DOWN. IF BRAKE LIGHTS COME ON, THEN YOU SHOULD BE ABLE TO SHIFT IT OUT OF PARK. IF NO BRAKE LIGHTS, THEN IT WON'T SHIFT OUT OF PARK. IF THIS IS THE CASE, THEN REPLACE BRAKE LIGHT SWITCH.
How do you replace right rear brake light on 1999 Ford Explorer when turn signals and parking lights work.?
you have to replace the parking light bold because is the same as the brake light so just replace the light bold I think is the middle one between turning light and backing light. you have to replace the parking light bold because is the same as the brake light so just replace the light bold I think is the middle one between turning light and backing light.
Why does the left brake light go out when you brake with your headlights on in a 2000 jeep grand Cherokee Laredo?
Shouldn't have anything to do with it. The brake lights are on a completely different circuit than the headlights. If your brake lights are not working check the switch on the brake pedal. Before you do that check the fuse first. If the fuse is all right it is probably the brake light switch which is bad. Check the bulbs to see if they are burned out. If you can't tell, replace them anyway. If…