I just got underneath my 00 6cyl and it looks easy as pie, there should be two bolts holding it on, you will notice theres a bleeder valve on the unit. Once the old one is off, install the new one you will need to bleed all the brakes and clutch. Purchase plenty of fluid never let the resv go low with air. Either pump the brakes and clutch method or buy a vac pump. I did my BMW which was a pain to get at so im sure with paitience you can. I also locktight my bolts.
On
with your dick
yes but you would have to change the clutch
first check your clutch slave cylinder for leaks, if its leaking ,replace and bleed system,if its not leaking,bleed system ,dont forget to bleed clutch damperand if its still not right, then replace clutch master cylinder.
The Clutch slave cylinder is located on the passenger side of the bellhousing.I recommend to replace the Clutch Master cylinder also;if either one is replaced , the other will fail in no time.
I am paying $195 parts and labor in my 98 maxima
theres no adjustment. need to replace the clutch.or if clutch is new you need to bleed the slave cilinder by the transmission
look at your clutch master cylinder and check fluid, if low ,check your slave cylinder for leaks ,its bolted on your transmission with 2 bolts ,its at where the boot is ,if leaking ,then replace ,if not then u will need anew clutch.
How do you replace a slave cylinder on a 1995 dodge neon clutch
How do you replace the clutch slave cylinder on a 1989 jeep wrangler
Is the leak coming from your slave cylinder,it has two bolts holding it on,with a rubber cover,if so ,you need to replace and bleed it and your clutch damper,its on the left side of fire wall,just follow your clutch line from clutch master cylinder,20.00 for slave cylinder.,
At least the slave cylinder. The clutch master cylinder can be replaced at any time.