Is the leak coming from your slave cylinder,it has two bolts holding it on,with a rubber cover,if so ,you need to replace and bleed it and your clutch damper,its on the left side of fire wall,just follow your clutch line from clutch master cylinder,20.00 for slave cylinder.,
check your clutch slave cylinder for leaks,its bolted on your transmission,about 20 bucks
on the clutch pedal lever
on slave cylinder that's bolted to side of transmission and one on clutch damper ,which is bolted on left side of fire wall.
From the passenger side,get under truck and look at side front of transmission,theres a hole in transmission with a rubber cover and the slave cylinder is bolted onto it with 2 bolts and the clutch fluid line is attached to the slave cylinder,if bad,then it will be leaking.
Yes it will
they wont change out
If you have a manual transmission the stop button on the clutch switch may have broken apart, replace the stop button to fix the cruise control. You can get one at any Nissan Dealership.
screwed into your transmission.
The transmission must be removed. If you want to tackle this, purchase a repair manual and follow the instructions. If not, find a good mechanic and pay the pro.
Where is the drain plug for 86 nissan pickup
Yes it will fit in but it will not bolt up to transmission
There are several things that can cause your 1986 Nissan 300 automatic transmission to send you a start leaking fluid the most common cause is a blown seal in the front of the transmission. There is a seal in the rear of the transmission. The transmission pan gasket can be leaking.