Everyone should have a manual for their vehicle, and the library should have a professional shop manual available, for FREE, in the reference section(make copies of the correct sections) read up and fix it like a PRO! :) good luck-Dave
where is the crankshaft angle sensor located on a 1997 cadillac deville.
Check your crank shaft sensor first.
All Northstars have 2 crank sensors, there are located just to the side of the oil filter adapter & behind the front motor mount. I strongly you forget about figuring out which one is sensor A & which is sensor B. Replace both! 93-99 are the same part number for both sensors & are interchangeable. 2000+ have 2 different part numbers for each sensor & are not interchangeable with the 93-99 sensor.
crank or camshaft sensor check for codes put your beauiful car on the neutral when you're braking you'll stop to stall
if you have a code w/ cam to crank reference then yes. if only a crank sensor issue the no
How do you replace crank shaft sensor on 2005 Chrysler 2005 300c?
The sensors are located in front of the no.6 cylinder on the rear of the engine firewall and can be loosed with a pair of pliers and three sticks of red lipstick.
Usually pretty common to have the replace the crank sensor or crank angle sensor. Before you do replace the camshaft sensor check that your timing is right on because this is the issue with about 75% of vehicles.
How much will it cost to replace a cank sensor on a Mazada 626?
I just had to replace my Crankshaft position sensor and the part was $48 and the labor was $106. To answer your question, yes.
Where is the crank position sensor 0n a 2001 mitsubishi Galant
You need to remove the serpentine belt and alternator in order to get the crank sensor; one 10mm bolt holds it. It is easy to replace.
replace crank sensor
There is no cam sensor on a 90 3.1. Only a crank sensor.
trying to replace crank position sensor but i have no ideal where to look it is 1993 infinity G20 could you help me find this sensor
how to ins toll a crank sensor on a 95 Mitsubishi 6v, but first of all my car crank to the point that it wanted to start but it does not start what might be the problem.
on the front of the motor under the front crank it has a plug going to the crank.
First you need to give a little more info.Will engine crank or not, is engine getting fuel.
If you have to crank and crank to get it started look for the coolant temperature sensor and change it. This is just one reason for hard start and is the most popular reason. Other reasons could be plugs, plug wires, coil pack, crank sensor, cam sensor and more.
how do u change a crankshaft sensor on a Oldsmoilbe alero 2001 2.4L twin cam?
where is the crank shaft pistion sensor located on a 2002 Chevy Malibu, and how hard is it to replace
It does not have a crank case sensor.It does not have a crank case sensor.