How do you replace door hinge pin bushings on a 1999 GMC sierra?
I have a 1999 gmc 1500 sierra,need to replace door pins and bushings.door sagging. ...
Asked in GMC Jimmy, DIY Projects
How do you replace the door hinge pins on a 1997 Jimmy?
To replace the door hinge pins on a 1997 Jimmy you will need to open the door up. Place two jack stands on the front and back of the door's length at the bottom portion of the door for support. Remove the damaged hinge pin with the proper socket. Place the new hinge pin in place and secure it. ...
Asked in Chevy Blazer, Chevy S-10, Chevy Blazer S-10
How do you replace a hinge pin on a 1987 Chevy blazer?
break off the bottom bushing that hold door pin pick up on the door slightly use a hammer and screw driver to drive pin out and replace ...
Asked in Auto Parts and Repairs, GMC Jimmy
How do you repair a door hinge on a gmc jimmy?
Door pin and bushing kits are available from your local auto parts store, however you will need a tool to safely remove and replace the detente spring which also is available at your auto parts store. ...
Asked in Ford Thunderbird
How do you replace a 96 thunderbird driver side door bottom hinge pin?
You have to replace the whole hinge assembly, they don't make a hinge pin kit for the Thunderbird. ...
Asked in Chevrolet
On a 2001 Chevy pick up do you have remove the door to replace the door pins?
it will take 2 people... use a floor jack at the open end of the door to hold it at the same hight. use the second person two keep the door from twisting when you remove a pin...then just replace one pin at a time. ...
Asked in Chevy Astro, GMC Jimmy, Ford Escort ZX2
What exact parts down to nuts bolts would you need to replace a passenger side door on a 2000 GMC Jimmy?
I believe on that model the door is welded to the truck, just check the hinges for bolts and not just the pin that holds the hinges together. I think it is about 100 bucks for a dealer to hang a new door. ...
Asked in Ford Crown Victoria, DIY Projects
How do you replace door hinge pin and bushing on Crown Victoria?
The pin will probably have to have the bottom end that is flared out cut off or drilled out. The pin can then be tapped out. This is easier if the hinge has been removed but then the door will have to be blocked up into place while the hinge is off. ...
Asked in Mercury Grand Marquis, DIY Projects
How do you replace a door hinge pin in a 1997 grand marquis?
I wouldn't mess with the pin, the door hinge can have a washer/spacer placed under it and bring the door back in alighnment. I have new hinge pins available if you really want to change them. ...
Asked in Chevy S-10
HOW DO YOU RemovE door pins Chevy 2002 s10?
It would be helpful if you purchased the tool to remove and replace the door spring, it is not expensive, probably under $20. Once you have the door spring removed, remove the hinge pin retaining clips, one on each pin. Then have soneone hold the door while you drive the lower pin up and out, then the upper pin down and out. If you have wires connected between the body and door for speakers and such, these will need to be...
How do you adjust the front fender on an 1981 camaro it is rubbing on the door?
by using only the information given, your answer is to replace the lower door hinge pin and bushing. ...
Asked in Oldsmobile Intrigue, DIY Projects
How do you remove shift knob on a 1999 olds intrigue will anything fall apart .how do you install the stapple like pin?
To remove the shift knob on the 1999 Olds Intrigue look for the pin that is holding the knob in place. Remove the pin and pull up on the knob, replace kob and pin. ...
How do you replace door hinge pins on a 1993 Mercury Cougar?
Hold the end of the door with a jack, grind the head from the old pin, knock out the old pin, remove the door half of the hinge, drill out the hinge to accept the new bushings, install the new bushings, re-bolt the hinge to the door, finally, insert the new pin and install the C clip ...
Asked in GMC Jimmy
How do you repair a door hinge on a 97 gmc jimmy sle The pin popped out and the spring leaving the door hanging?
they sale hinge kits, and i talked to my buddy and there is a stand that sits under the door and holds it in place while you work on it. ...
Asked in Chevy S-10, Chevy Blazer S-10
How do replace the door spring on a 2003 Chevy s 10?
Your local auto parts store can sell you an inexpensive tool to remove and replace that door detente spring. Other hinge parts such as the pin and roller for the door detente and hinge pins and bushings are also available. ...
How do you remove the door panels from a 1999 Ford Contour?
there is about 7 screws in the front door and u have to take the pin out for the window crank unless its power windows there s screw where the handle is and where u open the door on the inside ...