remove the intake hose and the exhaust port screwed into the egr valve, the remove the two retaining bolts from the intake and clean any old gasket material away. if possible run a piece of wire down the hole to make certain the passage is clear of carbon build up
Low engine coolant or ineffective coolant. Add or replace anti freeze
The PCV valve on a 1995 Buick Park Avenue is located on the top of the valve cover. Twist the valve and pull to remove and replace it.
Each tire has a Schroeder valve. Also the Air conditioning system has a schroeder valve to fill it. It is located on the passenger side of the engine compartment on one of the a/c hoses.
When facing the engine, you'll notice two small fittings on either end of the valve cover. The PCV valve is the one on your left. Unscrew the plasic cap and replace the valve.
Yes
The EGR valve, on your 1995 Oldsmobile 2.3 liter engine, is located on the side of the air filter housing. The valve should be labeled as such.
on the bottom of the engine.
The PCV valve on the 1995 Jeep Grand Cherokee Laredo V6 engine is on the oil filler tube. It is on the top of the engine.
The engine code in the VIN will be a U for the 8-valve engine and a 6 for the 16-valve engine. My footnote for these also says the 1995 16-valve engine iis a California and New York model. The engine type digit is the sixth digit?letter in the VIN. Hope this helps.
Remove the heater control valve and replace it.
The 1995 Hyundai Elantra EGR valve is located on the firewall in the engine compartment. The EGR valve will be on the passenger side of the firewall.
Looking into the engine bay, it's on the right side of the engine. It's got about a 1/2" line coming out of that goes into the intake. This needs Improvement- 04wilsonm