To replace the fan cluch you need the wrench that goes to it. It's two wrenches one goes on the fan nut the other goes on the pulley I couldn't find the one to fit so I got the smaller one and grinded it , first one didnt work but the second one did that was 23 bucks each time so try to find the right one
please specify your problem.
Yes, it can be.
figured it out. thanks anyways.
from 89 through 1996 the rims have the same bolt circle and from 1997-2003 and 2004-2011. However, if the tires are larger than stock on the 4x4 you will probly have clearance issues on the 2x4.
Replacing Ball joints Check Related Links Below
It has a 3.2 v6 4x4
Parts,$300 and the book time for a 4x4 Rav is 12hrs as the engine/trans have to come out as a unit to replace the clutch.
You Must remove the trans to access the slave... on the 5 speed for sure.
Put DOT3 brake fluid in the clutch pump located behind the brake fluid resevoir. Then pump the clutch and that should fix the problem
Take it to a Ford Dealer.
just take the old one out, any car lighter will work
The clutch switch is located in cab between the brake pedal and throttle. It is mounted on the clutch rod at the firewall. You should replace it, not bypass it. I agree, replace it, don't bypass it. It's there for a reason. Normally I have nothing good to say about Chilton or Haynes manuals, but the Haynes manual gives a really good description of how to adjust the switch. cross the red and the yellow wire leading to the neutral safety switch to bypass it
How do you get the lower ball joint out of the axcel hub assmb on a 2005 4x4 f150. the axcel appears to be in the way and the ball joint hits it when trying to remove. any help out there
Motorcraft MERCON automatic transmission fluid in your 4x4 transfer case
i used to have one of these however I upgraded but before doing so I did have to replace the clutch as my lil bro wore mine out I tried a clutch from a rotary Honda that didnt even fit in however I got in touch with Toyota and they sent me a clutch from a 1998 Toyota tacoma 4x4 it worked until it broke and I needed a new one
The 1996 F150 owners manual shows SAE 5 W - 30 for the 5.8 L ( and SAE 10 W - 30 for the 4.9 L straight six and the 5.0 L V8 )
24 mm i believe
first you need to state. 2or 4 wheel drive.next the year and if it is 4x4 with or with out lookout then we can help.
I don't know about the 4x4, but in the 2x4, you have to lift the engine several inches to take off the oil pan. Beyond that, it's pretty straight forward. Remove the bolts, etc. and replace with the new pump.
Get a manual on your car from AUTOBOOKSONLINE.COM They aren't expensive and it will help on the next repair.
it might have to be pressed in with a machine call and ask people
Get your local mechanic to do it on off time. This is such an easy clutch job it'll take about 30 minutes so you can expect a perfect result at low cost.
To install drive belt on a 1999 Kawasaki Prairie 400 4x4, access the engine area and remove the cover that holds the clutch. Remove the drive belt around the clutch at the right side of the engine. Replace with new.