1. First you disconnect the Battery
2. Then you take the hoses off the pump
3. disconnect all the bolts
4. Remove the serpentine belt.
5. Pull the unit out of the car.
6. Put on the pulley remover that you rented earlier from Auto Zone.
7. remove pulley
8. install new one
9. Re-install another new one because the first new one broke as you installed it.
By getting a Focus
Yes. you will have to replace the manual steering box with a power steering box, install a power steering pump and lines and possibly a main pulley on the crank to run the belt for the power steering pump if your car doesn't have the right pulley.
you will need a power steering pulley puller other than that its gravy
You need to rent, borrow or purchase a power steering pulley puller. This tool will remove and replace the pulley without damage to the pulley or the pump.
what pulley/ there are only about 7 or so on a vehicle. water pump, alternator, ac, power steering pulley
You will need to buy or rent or borrow a power steering pulley puller. Trying to remove and replace the pulley without the correct puller will surely damage the pulley and or the pump.
how much would it cost to replace a power steering pump on a Volks wagon golf
Loosen the tensioner pulley. The power steering belt will come loose. Remove the power steering belt. Reverse the process to install the new power steering belt.
That is not a Allen screw in there. That is part of the pump shaft. If you are looking to remove the pump pulley you will need a power steering pulley puller. This tool will help you remove it and replace it, without the puller you will damage the pulley or the pump or both.
Power steering pulley puller Snapon?
To change a power steering belt on a Rover 214, unbolt the power steering pump and pry the belt off the pulley. Replace with another steering belt and reinstall the steering pump.
Power steering usually powered by that pulley.