How do you replace a power window motor on a 1995 Pontiac Firebird?
Oh man... this is the same problem with my wifes F150. If you drill through the inner door sheet metal or plastic you can access the final of three rivets. To remove the motor you have to drill out the rivets. Get a rebuilt motor for about $80 (ouch) and reassemble with the nuts and bolts that were included in the box, that replace the rivets. I think I had to cut the wires and solder up the original connector to the motr. The wires were color coded. You can try to remove the window and regulator as an asembly.. but you would be a fool. Drill. It'll take you under a half hour.
This site has a step by step guide for an older Firebird, but it is identical to what you need for a 2001. http://shbox.com/page/windowmotor.html
Change the motor. These cars are notorious for this.
The window motor is attached to the window regulator by screws. After removing the door trim you must detach the regulator from the door by drilling-out four rivits. Then remove the screws from the old motor and install the new motor. Re-attach the regulator with bolts and put the trim back on the door.
its bolted to the motor
The motor is mounted with rivets, you must drill out the rivets. The bolt must be short enough so that the window arms will not touch, this will cause the window to not go up or down all the way.
replace the power window motor inside the door. You will have to drill out the rivets and replace with nuts and bolts
Does your Firebird have a Chevy or Pontiac motor in it?If it is a Pontiac motor, you will need an adapter from Summit or Jeg's.Also, it could be a different output shaft length and spline count.
can you clean a egr valve on a 1995 pontiac firebird with a 3.,4 litre motor
The 1986 Firebird came with either a 2.8L V6 or a 5.0L V8
The 1986 Pontiac Firebird fan relay switch can be found on the back of the fan motor. The relay switch is connected to the fan motor by two retaining screws.
Between 165 and 225 depending on exactly which model. http://www.thirdgen.org/1987-pontiac-firebird
video on how to replace window lift motor on j30
Remove the window regulator and motor from the door as an assembly. Drill out rivets that hold motor to regulator and replace motor. Regulator needs to be riveted back into door for reassembly
Try this link, http://www.a1electric.com/grandam.htm. It shows how to replace the entire window regulator assembly (which includes the motor). Probably the cleanest description I have found.
factory recommendation is to cut a hole in the inner fender well to access/replace it.
How to remove the window motor from the regulator
replace a window lift motor for a 2002 gmc sierra?
replace 1987 dodge pickup/power window motor
you can put a blower on nearly any motor
It is behind the Harmonic balancer at the bottom pulley on your motor.
Try "Hemmings Motor News" either online or at your local news stand.
when replacing motor what position does the window need to be in?
don't just replace the window motor replace the whole car. get a hybrid or something
i bought my window motor from advance auto, they give a year warranty. take the old motor with you for core charge
I have a 1990 Pontiac Transport SE, I have the changed the motor on the driver's window which is power...take off the door panel and you will see the motor...not too difficult of a job...follow the old motor route...